Table of Contents
Advertisement
Overlay : If <Enable> is selected, confi gured event rules and motion frame
are displayed on the Live screen. Selecting <Disable> will not display overlay
information.
M
Motion frame is displayed in two types on the Live screen.
Green frame – indicates the moving object
Red frame – Temporarily displays the moving object detected by the confi gured event
rules.
Sensitivity : Sets the sensitivity of the intelligent video analysis.
-
Sensitivity : Select the sensitivity among <Very high>, <High>, <Normal>,
<Low>, and <Very low>.
When selected with <Very high>, the intelligent video analysis functions on the
smallest motion detection.
Set rules
You can set the event rules.
-
Virtual line based rules : You can confi gure event rules for up to 3 virtual lines.
<Event Types>
Pass : Event is generated if a moving object crosses the virtual line in the specifi ed
direction ( ,
,
)
-
Defi ned area based rules : You can confi gure event rules for up to 3 user-
defi ned areas.
<Event Types>
Entering : Event is generated if a moving object enters the defi ned area from
outside to inside.
Exiting : Event is generated if a moving object exits the defi ned area from
inside to outside.
Appearing : An object that has not been existed in the area until the previous
frame suddenly appears inside the confi gured area, not passing the border
Disappearing : An object that has been existed in the area until the previous
frame suddenly disappears, not passing the border.
-
Entire area based rules : You can confi gure event rules for the entire video area.
English _65
Hide quick links:
Advertisement
Table of Contents
