Samsung SNB-3000P User Manual page 66

setup screen
<Event Types>
Appearing: An object that has not been existed until the previous frame
appears in the area.
Disappearing: An object that has been existed until the previous frame
disappears from the area.
Scene Change: This event is generated by a complete scene change, such as
camera veiled by hand or changed camera's aiming, etc.
- Object size: The maximum object size of motion detection for each event
generation. The minimum size can be adjusted in 5 levels.
Minimum size (the minimum rectangular motion detection area): Step 1: 6x6 (pixel),
Step 5: 50x50 (pixel)
Maximum size (the maximum rectangular motion detection area): Step 1: 60x60
(pixel), Step 5: 320x240 (pixel)
The initial setup for the minimum is 6x6 and for the maximum is 320x240.
Activation time : Sets the operation time of the intelligent video analysis.
- Always : Confi gured action is performed whenever an intelligent video analysis
event occurs.
- Only scheduled time : Confi gured action is performed when intelligent video
analysis event occurs during the specifi ed time period.
Action : You can confi gure the action for an intelligent video analysis event.
- Alarm output : Sets the alarm output port for the signaling the intelligent video
analysis event.
- Output duration : Sets the alarm signal dwell time to the Alarm Output port on
an intelligent video analysis event.
When another intelligent video analysis event follows the previous one, the
output duration time is reset based on the most recent event.
- Alarm image transfer : If selected <Enable>, depending on your setting of
<Event> - <Transfer setup>, the image in JPEG format will be sent to the
registered address via FTP or e-mail (SMTP), or saved in the SD memory card.
66_ setup screen