Connecting With Other Device; Power Supply - Samsung SNB-3000P User Manual

installation & connection

CONNECTING WITH OTHER DEVICE

Connecting to the monitor
Connect the [VIDEO] port of the camera to the video input port of the monitor.
Network Connection
Connect the Network cable to the local network or to the Internet.

Power Supply

Use the screwdriver to connect each line of the power cable to the corresponding port of
the camera.

J
Be careful not to reverse the polarity when you connect the power cable.
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
18_ installation & connection
Monitor
VIDEO
AUDIO OUT AUDIO IN
SD CARD
SD SYSTEM POWER
RESET
NETWORK
1 2 3 4 5
1,2 : ALARM IN 1,2
ACT LINK AC 24V
3 : GND
DC 12V
GND
4,5 : ALARM OUT 1,2
Network
Power