Connecting The Camera Directly To A Dhcp-Based Xdsl/Cable Modem - Samsung SNB-3000P User Manual

Select : <Network Neighborhood>
<Properties>
<Obtain an IP address automatically> or <Use the following IP address>.
Follow the instructions below if you select <Use the following IP address>:
ex1) If the address (LAN IP) of the Broadband Router is 192.168.1.1
IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
ex2) If the address (LAN IP) of the Broadband Router is 192.168.0.1
IP address: 192.168.0.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
ex3) If the address (LAN IP) of the Broadband Router is 192.168.xxx.1
IP address: 192.168.xxx.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.xxx.1

M
For the address of the Broadband Router, refer to the product's documentation.
CONNECTING THE CAMERA DIRECTLY TO A DHCP-
BASED XDSL/CABLE MODEM
SNB-3000
Setting the Broadband Router
This is enabled for a modem using DHCP.
1. Set the Static or Dynamic IP address. (pages 36~39)
2. Launch an Internet browser on the local PC connected to the Broadband Router.
3. Enter the Broadband Router's address in the address bar of the browser.
ex) http://192.168.1.1, http://192.168.0.1
or http://192.168.xxx.1

For the DDNS URL address, refer to "To check the DDNS address". (page 43)
<Properties>
<General> <Internet Protocol (TCP/IP)>
INTERNET
xDSL or
Cable Modem
DDNS Server
(Data Center, KOREA)
<Local Area Connection>
<Properties>
External Remote PC
English _33