Roland JP-8080 Owner's Manual page 37

Here's how to produce the following arpeggio.
C3 D3 E3 G3
1
Select the Performance P1: 88 (p.23).
2
Press PANEL SELECT [LOWER].
By playing the MIDI keyboard, you will hear the Lower Patch sound. Let's play the arpeggio using this
sound.
3
Press the ARPEGGIATOR/RPS section [ON].
The indicator will light, and the arpeggiator will be turned on.
4
Hold down the following notes on the MIDI keyboard.
D3 G3
C3 E3
The arpeggio will begin to play.
The arpeggio will play as long as you continue holding the notes.
5
Rotate [TEMPO] to adjust the tempo to your liking.
6
Press [HOLD].
The indicator will light and the arpeggio will continue to play even if you take your hand off the MIDI
keyboard.
7
To stop the arpeggio, press [HOLD] once again.
The indicator will go dark.
8
To turn off the arpeggiator, press [ON].
The indicator will go dark.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
For details on arpeggio settings
"Chapter 5. Producing Arpeggios When Chords are Played (Arpeggiator)" (p.90)
Arpeggiator settings can be saved in a Performance.
"Storing a Performance" (p.32)
The arpeggiator can also be used during Preview.
"Playing Sounds Using the JP-8080 Alone (Preview)" (p.65)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
C4
37