Inputting An External Sound Synthesized On The Jp-8080 Into The Voice Modulator - Roland JP-8080 Owner's Manual

To obtain a formant filter effect, simultaneously input an
external sound (by playing a note or playing back a tape
or CD) and input your voice from the mic.
4
Hold down [SHIFT] and press PANEL SELECT
[UPPER].
The Voice Modulator panel will be selected. Move the
sliders/knobs to modify various Voice Modulator para-
meter values.
* If you wish to input audio from a tape or CD instead of
from a mic, input the sound from the VOCAL/UPPER
jack. In this case, turn [REAR/FRONT] off (REAR).
(2) Filter Bank
JP-8080
INST/LOWER VOCAL/UPPER
OUTPUT
Synthesizer (keyboard)
JP-8080
INST/LOWER VOCAL/UPPER
OUTPUT
Tape/CD player
1
As shown in the diagram, connect your external
equipment to the JP-8080.
2
Execute the Voice Modulator Initialize operation.
[INIT/UTIL]: VMod Init (p.106)
Initialize to either F.BANK: STANDARD or F.BANK:
RADIO.
At this time, the Voice Modulator panel will be selected.
3
Use the EXTERNAL INPUT [INST/LOWER] /
[VOCAL/UPPER] to adjust the volume of the exter-
nal inputs.
To obtain a filter bank effect, input an external sound
(by playing a note or playing back a tape or CD) and
move [1]–[12].
Inputting an External Sound Synthesized
on the JP-8080 Into the Voice Modulator
(1) Formant Filter
Here's how you can use the Lower part to synthesizer an
external sound, and input that sound into the Voice
Modulator.
JP-8080
INST/LOWER REMOTE KBD IN
OUTPUT MIDI OUT
Synthesizer (keyboard)
JP-8080
INST/LOWER
OUTPUT
Tape/CD player
1
As shown in the diagram, connect your external
device or mic to the JP-8080.
2
Initialize the performance to a standard set of set-
tings.
[INIT/UTIL]: Initialize: PERF: TEMPORARY (p.140)
3
Press PANEL SELECT [LOWER] to select the Lower
part.
4
Turn OSC 2 [EXT] on.
The external sound will be input to the Lower part.
5
Set OSC COMMON [OSC BALANCE] to OSC 2.
The Lower part will sound using the external sound.
6
Use EXTERNAL INPUT [INST/LOWER] to adjust
the volume of the external input.
7
Move the panel sliders/knobs to edit the external
sound.
8
Execute the Voice Modulator Initialize operation.
[INIT/UTIL]: VMod Init (p.106)
REMOTE KBD IN
MIDI OUT
MIDI keyboard
147