Midi Channel Settings - Roland JP-8080 Owner's Manual

MIDI Channel Settings

The JP-8080 receives MIDI messages from another device, and produces sound in response. In order to
play the JP-8080 from a MIDI keyboard connected to REMOTE KBD IN, you will need to set the transmit
channel of the MIDI keyboard to match the Remote Keyboard Channel of the JP-8080.
For this example, let's set both channels to "1."
* Immediately after the factory settings have been restored, the JP-8080's Remote Keyboard Channel will be
set to ALL (all channels will be received). (p.124)
1
Set the transmit channel of your MIDI keyboard to "1."
For details on this setting, refer to the owner's manual of your MIDI keyboard.
2
Press [EDIT].
The [EDIT] indicator will light and the BANK [1]–[8] indicators will blink.
3
Press [MIDI] (BANK [5]) several times to access the Remote Keyboard Channel display.
The [MIDI] indicator will light.
4
Use [DEC]/[INC] several times to choose "1."
5
When you finish making settings, press [EXIT].
The [EDIT] indicator will go dark, and the previous display will reappear.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
22
If an external MIDI device is connected to MIDI IN/OUT
"Setting the MIDI Channel for Each Part" (p.118)
"Perform Ctrl CH (Performance Control Channel)" (p.124)
3
4
2 5