Roland JP-8080 Owner's Manual page 130

3
Press [INIT/UTIL] (BANK [7]) several times to
access the Card display.
The [INIT/UTIL] indicator will light.
4
Use [DEC]/[INC] several times to choose "USER->CARD."
5
Press [WRITE].
6
Use [DEC]/[INC] several times to choose "PERFOR-
MANCE."
7
Press [WRITE].
8
Use [DEC]/[INC] several times to select the save
destination.
9
Press [WRITE].
A confirmation message will appear.
To cancel without saving, press [EXIT].
10
Press [WRITE].
The display will indicate "Completed."
The performance data has now been saved to the card.
11
Press [EXIT] to return to the previous display.
Performances saved on a card can be directly selected
and used. (p.59)
Saving patches to a card (PATCH)
All user patches can be saved together on a memory card.
The data can be saved in three ways: both USER A and B,
only USER A, or only USER B.
* If you wish to save the patch in the temporary area
directly to the memory card, refer to "Saving Data
(p.128)."
1
Make sure that a formatted memory card has been
inserted into the card slot.
2
Press [EDIT].
The [EDIT] indicator will light and the BANK [1]–[8]
indicators will blink.
3
Press [INIT/UTIL] (BANK [7]) several times to
access the Card display.
The [INIT/UTIL] indicator will light.
4
Use [DEC]/[INC] several times to choose "USER->CARD."
130
5
Press [WRITE].
6
Use [DEC]/[INC] several times to choose "PATCH."
7
Press [WRITE].
8
Press [DEC]/[INC] several times to select the con-
tents that will be saved.
USER A&B: USER A,B patches
USER A: USER A patches
USER B: USER B patches
9
Press [WRITE].
10
Use [DEC]/[INC] several times to select the save
destination.
11
Press [WRITE].
A confirmation message will appear.
To cancel without saving, press [EXIT].
12
Press [WRITE].
The display will indicate "Completed."
The patch data has now been saved to the card.
13
Press [EXIT] to return to the previous display.
Patches that have been saved to a memory card can be
directly selected and used. (p.61)
* If you save "USER A"/"USER B" patches to a group
into which no data was ever written before, initialized
patch data (INIT PATCH: p.143) will be automatically
written into the other group (A or B).