Table of Contents
Advertisement
Features of your vehicle
Rolling code programming
To train a garage door opener (or other
rolling code equipped devices) with the
rolling code feature, follow these instruc-
tions after completing the "Programming"
portion of this text. (A second person
may make the following training proce-
dures quicker & easier.)
4. Locate the "learn" or "smart" button on
the device's motor head unit. Exact
location and color of the button may
vary by product brand. If there is diffi-
culty locating the "learn" or "smart" but-
ton, reference the device's owner's
manual or contact HomeLink
800-355-3515 or on the internet at
www.homelink.com.
5. Press and release the "learn" or
"smart" button on the device's motor
head unit. You have 30 seconds to
complete step number 6.
6. Return to the vehicle and firmly press
and
release
the
®
HomeLink
button up to three times.
The rolling code equipped device
should now recognize the HomeLink
signal
and
activate
®
HomeLink
button is pressed. The
remaining two buttons may now be
programmed if this has not previously
been
done.
Refer
"Programming" portion of this text.
3
180
Operating HomeLink
To operate, simply press the pro-
grammed HomeLink
will now occur for the trained product
(garage door, security system, entry door
lock, estate gate, or home or office light-
ing). For convenience, the hand-held
transmitter of the device may also be
used at any time. The HomeLink
Wireless Controls System (once pro-
grammed) or the original hand-held
transmitter may be used to activate the
device (e.g. garage door, entry door lock,
etc.). In the event that there are still pro-
®
at 1-
gramming
®
HomeLink
at 1-800-355-3515 or on the
internet at www.homelink.com.
programmed
®
when
the
to
the
®
®
button. Activation
®
Erasing programmed HomeLink
difficulties,
contact
buttons
To erase the three programmed buttons
(individual buttons cannot be erased):
• Press and hold the left and center
HomeLink
ing) mode and can be programmed at
any time.
Flashing
OVQ036306N
buttons simultaneously, until the indi-
cator light begins to flash (approxi-
mately 20 seconds). Release both but-
tons. Do not hold for longer than 30
seconds.
®
is now in the train (or learn-
®
Advertisement
Table of Contents
