Using Cd Player; Cd Slot; Cd Indicator; Cd Eject Button - Kia Sedona 2014 Owner's Manual

Table of Contents

Advertisement

Using CD Player

1. CD Slot

Insert a CD label side up and gently push
in while ignition switch is on ACC or ON.
The audio automatically switches to CD
mode and begins to play the CD. If the
audio was turned off, audio power will
automatically turned on as the CD is
inserted.
• This audio only recognizes 12cm-size,
CD-DA (Audio CD) or ISO data-CD
(MP3 CD).
• If UDF data-CD or non-CD (e.g. DVD)
is inserted, "Reading Error" message
will be displayed and the disc will be
ejected.
CAUTION
Do not insert a CD if CD indicator
is lit.
2. CD Indicator(CD Player :PA710S)
When car ignition switch is ACC or ON
and if the CD is loaded, this indicator is lit.
If the CD is ejected the Icon is off.

3. CD Eject Button

Press
button to to eject the CD. This
button works regardless of ignition
switch status.
• ALL EJECT(CD Changer :PA760S)
Press this button for more than 0.8
seconds to eject all discs inside the
deck in respective order.
4. CD LOAD Button
This compact disc player will accommo-
date up to six compact discs.To insert
discs into the player, perform the follow-
ing:
• Press and release the [LOAD] Button.
• Green light on the slot will be illuminat-
ed and the lowest number of empty
slot will blink on the display. After "Wait"
is displayed on the LCD, the slot will
open with "Insert CD" displayed on the
LCD.
• Insert a disc partway into the slot, label
side up. The player will pull the disc in.
When the disc is inserted, the disc will
begin to play automatically.
Features of your vehicle
✽ ✽ NOTICE
• The disc can be only inserted while the
green light is blinking on the slot.
• This CD player is suitable only for
12cm discs, do not use irregular
shaped CDs.
To insert multiple discs:
• Press and hold the [LOAD] button for
one second or more. You will then hear
a beep sound and the green light on
the slot will be illuminated, and the
numbers of empty disc will blink on the
display.
• After "Wait" is displayed on the LCD
with the lowest number of empty slot
blinking, the slot will open with "Insert
CD" displayed on the LCD.
• Insert a disc partway into the slot, label
side up. The player will pull the disc in.
Once the disc is loaded, the numbers
of the empty disc will blink on the dis-
play continuously.
If the next "Insert CD" is displayed
when the slot is illuminated, you can
then load another disc.
• Load the remaining disc by following
procedures 1 and 2. When you finished
loading 6 discs, the CD player will
begin to play the last CD loaded.
3 205

Advertisement

Table of Contents
loading

Table of Contents