Compass; To Operate Compass Feature; Calibration Procedure; Setting The Compass Zone - Kia Sedona 2014 Owner's Manual

Compass (if equipped)

To operate Compass feature

Press and release the button (2), then
the vehicle's directional heading will be
displayed.
Pressing and releasing the button again
will turn off the display.
Heading display
- E : East
- W : West
- S : South
- N : North
ex) NE : North East

Calibration procedure

Press and hold the button (2) between 9
and 12 seconds. Release the button
when a "C" appears in the display, which
indicates the compass needs calibration.
1. Driving the vehicle in a circle at less
than 8km/h 2 times or until the com-
pass heading appears.
2. Driving in a circle in right-handed
direction and opposite direction are
possible, and if the calibration is com-
pleted, the compass heading will
appear.
3. Keep driving in a circle until a compass
heading appears.
Features of your vehicle

Setting the compass zone

1. Determine the desired Zone Number
based upon your current location on
the Zone Maps below.
2. Press and hold the button (2) for more
than 6 but less than 9 seconds, the
current Zone Number will appear on
the display.
3. Pressing and holding the button (2)
again will cause the numbers to incre-
ment (Note: they will repeat ...13, 14,
15, 1, 2, ...). Releasing the button
when the desired Zone Number
appears on the display will set the new
Zone.
4. Within about 5 seconds the compass
will start displaying a compass heading
again.
3 113