Rolling Code Programming - Kia 2016 Optima Owner's Manual

5. Press and hold the just-trained
HomeLink ® button and observe
the red Status Indicator LED. If the
indicator light stays on constantly,
programming is complete and
your device should activate when
the HomeLink ® button is pressed
and released.
6. To program the remaining two
HomeLink ® buttons, follow steps 2
through 5.

Rolling code programming

Rolling code devices which are
"code-protected" and manufactured
after 1996 may be determined by the
following:
• Reference the device owner's
manual for verification.
• The handheld transmitter appears
to program the HomeLink
Universal Transceiver but does not
activate the device.
• Press and hold the
HomeLink ® button. The device has
the rolling code feature if the indi-
cator light flashes rapidly and then
turns solid after 2 seconds.
Features of your vehicle
To train rolling code devices, follow
these instructions:
1. At the garage door opener receiv-
er (motor-head unit) in the garage,
locate the "learn" or "smart" button.
This can usually be found where
the hanging antenna wire is
attached to the motor-head unit.
Exact location and color of the but-
®
ton may vary by garage door open-
er brand.
If there is difficulty locating the
trained
training button, reference the
device owner's manual or please
visit our web site at www.home-
link.com.
2. Firmly press and release the
"learn" or "smart" button (which
activates the "training light").
✽ ✽ NOTICE
There are 30 seconds in which to ini-
tiate step 3.
4 57