To Install The Rear Seat - Kia Sedona 2014 Owner's Manual

Features of your vehicle

To install the rear seat:

1. Put the front anchor strikers along the
front anchors on the floor.
2. Insert two front anchor strikers into the
front anchors.
3 54
OVQ036216N
3. Lift the rear portion of the seat cushion
then push down firmly to lock the
catches into the rear anchors until an
audible "click" is heard.
OVQ036209N
4. Make sure the green mark on the rear
seat cushion frame is visible and the
catches are locked in position by mov-
ing the seat forward and backward or
lifting the front portion of the seat. If the
green mark is invisible and the seat
moves, it is not locked properly.
5. Pull up the seatback recline lever (or
folding strap).
6. Lift and push the seatback backward
firmly until it clicks into place.
Make sure the seatback is locked in
place.
7. Return the rear seat belt to the proper
position.
OVQ036210N