Lap/Shoulder Belt - Kia Sedona 2014 Owner's Manual

Lap/shoulder belt

To fasten the lap/shoulder belt:
1. Grasp the buckle and tongue plate.
2. Slowly pull the lap/shoulder belt out
from the retractor.
1GHA2262
3. Insert the tongue plate (1) into the
open end of the buckle (2) until an
audible "click" is heard, indicating the
belt is locked in the buckle.
Features of your vehicle
1VQH2263
4. Position the lap portion (2) of the belt
across your lap as LOW ON THE HIPS
as possible to reduce the risk of sliding
under it during an accident. Adjust the
belt to a SNUG FIT by pulling up on
the shoulder portion (1) of the safety
belt. The belt retractor is designed to
take up excess webbing automatically
and to maintain tension on the belt. For
your safety, do not put any excess
slack into the safety belt at any loca-
tion.
✽ ✽ NOTICE
If you are not able to pull out the safety
belt from the retractor, firmly pull the
belt out and release it. Then you will be
able to pull the belt out smoothly.
1VQH2264
3 65