Oce OP1016 Operation Manual page 87

5-3 Registering Dialing Information
7. Add a new destination to the program.
Select from among the following 3 methods of adding destinations to a program.
Add a destination that is registered under one-touch dialing to the program
1 Click on the 1-Tch tab above the list at left and select the one-touch information that you want to add to the program.
* If your machine possesses abbreviated dialing capabilities, it is also possible to add destinations that are registered
under abbreviated dial numbers.
2 Click on the Add>> button. The selected information will be added to the list at right.
Enter a destination fax number that to be added to the program
1 Click on the New Fax No. button. The Input Fax No. dialogue box will appear.
2 Enter the destination fax number in the Fax No. field.
3 When performing F-Code Based Communication, select the Subaddress setting and then enter the corresponding
subaddress and password.
4 Click on the OK button. The Add new destination dialogue box will appear once again and the registered information
will be added to the list at right.
1
1
Page 5-20
2
2
3
4