Deleting Registered Boxes - Oce OP1016 Operation Manual

5-4 Registering Box Information
9. Make sure that the added destinations are correct and then click on the OK button. The Subaddress Relay Box dialogue
box will appear once again.
10. Make sure that the registered information is correct and then click on the OK button.
11. Transmit the edited data to the fax machine. Refer to steps 9 and 10 under "5-1 Registering Self-Station Information" on
page 5-2 to transmit the edited data to the fax machine.

(4) Deleting registered boxes

Perform the following procedure when you want to delete registered boxes.
1. Follow steps 1 through 6 under "5-1 Registering Self-Station Information" on page 5-2 and open the Address Editor for
FAX window. Then select the desired method of connection to the fax machine.
2. Point to the Box command under the Registration menu. The Box Registration window will appear.
3. Click on the tab that corresponds to the box that you want to delete, either the Subad. Conf. tab, the Encryption tab or
the Subad. Relay tab.
4. Select the box that you want to delete and then click on the Delete button.
5. Transmit the edited data to the fax machine. Refer to steps 9 and 10 under "5-1 Registering Self-Station Information" on
page 5-2 to transmit the edited data to the fax machine.
Page 5-36