Oce OP1016 Operation Manual page 74

5-1 Registering Self-Station Information
10. Connect to the fax machine and transmit the edited data.
Select from among the following 3 methods of connecting to the fax machine.
Connect to the fax machine by entering the fax's IP address or host name
1 Enter the fax's IP address or host name in the NW-FAX Address field.
2 Click on the Send Data button. The Administrator Password dialogue box will appear.
3 Enter the password* and then click on the OK button. The connection will be made to that fax machine and transmission
of the data will begin.
Connect to a fax machine that you have connected to before
1 Use the dropdown menu for the NW-FAX Address field to select the fax's IP address or host name.
* Up to the last 10 fax machines that you have connected to will be displayed.
2 Click on the Send Data button. The Administrator Password dialogue box will appear.
3 Enter the password* and then click on the OK button. The connection will be made to that fax machine and transmission
of the data will begin.
Connect to the fax machine by searching over the network without entering the fax's IP address
1 Click on the Start Searching button. A search will begin for all fax machines connected to the network and the NW-
FAX List will appear.
2 Select from the NW-FAX List the fax that you want to connect to and then click on the Send Data button. The
Administrator Password dialogue box will appear.
3 Enter the password* and then click on the OK button. The connection will be made to that fax machine and transmission
of the data will begin.
* It is necessary to enter the Administrator Password in order to connect to the fax machine and edit registered data.
Refer to the Scanner Edition of your Operation Guide for more detailed information on the Administrator Password.
1
2
1
2
1
2
Page 5-7
3
3
3