Transmission Control - Oce OP1016 Operation Manual

2-6 Transmission Control

Perform the following procedure when you want to use your computer to verify the status of a fax transmission currently
being processed, or to actually terminate that transmission.
1. Once a fax transmission begins being processed, a Transmission Control icon will be displayed in the Windows Task Bar.
2. Double-click on that icon in order to access the Sending Control window which indicates the status of all transmissions
being processed.
3. If you want to terminate any transmission, select that transmission and then select Cancel from the Document menu.
INFORMATION
If you right-click on the Transmission Control icon, the menu shown below will appear.
Select Version Information if you want to check the version of your Transmission Control software.
Select Exit to quit Transmission Control and delete the icon from the Task Bar.
Page 2-21