Oce OP1016 Operation Manual page 102

5-4 Registering Box Information
8. Add a new destination to the list.
Select from among the following 3 methods of adding destinations to the list.
Add a destination that is registered under one-touch dialing to the list
1 Click on the 1-Tch tab above the list at left and select the one-touch information that you want to add to the list.
* If your machine possesses abbreviated dialing capabilities, it is also possible to add destinations that are registered
under abbreviated dial numbers.
2 Click on the Add>> button. The selected information will be added to the list at right.
Enter a destination fax number to be added to the list
1 Click on the New Fax No. button. The Input Fax No. dialogue box will appear.
2 Enter the destination fax number in the Fax No. field.
3 When performing F-Code Based Communication, select the Subaddress setting and then enter the corresponding
subaddress and password.
4 Click on the OK button. The Add new destination dialogue box will appear once again and the registered information
will be added to the list at right.
1
Adding a chain dial number
1 Click on the Chain tab above the list at left and select the chain dial information that you want to use.
2 Click on the Add>> button. The selected information will be added to the list at right.
3 Register the destination that you want to add to the list. Perform either steps 1 and 2 of "Add a destination that is registered
under one-touch dialing to the list" or steps 1 to 4 of "Enter a destination fax number to be added to the list" above.
4 The added destination will be registered in the list at right under the number that corresponds to the designated chain
dial information.
1
1
Page 5-35
2
2
3
4
2