Assembly Instructions - Stamina CPS 9190 Indoor Cycle Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning. If you
are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at
customerservice@staminaproducts.com.
STEP 1
Make the WHEELS(49) on the FRONT STABILIZER(3) face the front, then attach the FRONT STABILIZER(3)
to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x15mm)(55) and WASHERS(M8)(69).
STEP 2
Attach the REAR STABILIZER(4) to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x15mm)
(55) and WASHERS(M8)(69).
NOTE: See page 10 for detailed leveling instructions to prevent rocking.
STEP 3
Pull the ADJUSTMENT KNOB(48), then insert the SEAT POST(5) into the MAIN FRAME(1) and secure
with the ADJUSTMENT KNOB(48).
NOTE: The pin of the ADJUSTMENT KNOB(48) should be inserted into one of the adjustment holes in
the SEAT POST(5). And the ADJUSTMENT KNOB(48) should be screwed in tight to make the
SEAT POST(5) fits securely in the MAIN FRAME(1).
7