Table of Contents
Advertisement
3
INSTALLATION
1. Unscrew the protection cap from the mouth of the lens mounting.
2. If a C-mount lens is to be used, please screw the C-mount adaptor ring (the
5mm-thick ring in the accessory pack) on to the mouth of the lens mounting.
3. Mount the lens by turning it clockwise on the lens mounting of the
camera.
4. If you use an Auto Iris lens, connect the lens's cable to the Auto Iris
lens connector on the side of the camera.
5. Place an ND filter in front of the lens, adjust the lens focus until the
best image is obtained.
6. Lock the lens's focus position by tightening the swivel screw, then
remove the ND filter.
Mount the lens
5
EQ610x
Advertisement
Table of Contents
