Algorithms; Algorithm 1 - Kawai K5000S Owner's Manual

ALGORITHMS

Anatomy of an Effect Algorithm
Effects Blocks
Effect Input Channels
Source A 0 0 1 R u n n e r
1 2 3 4 5 6
Assignment
> 1 - - - - - 1 E 1
Grid
> - 2 - - 2 - 2
> - - 3 - - - 3
Sources 2 & 5
> - - - 4 - - 4
to Input 2
A l g
Source 4
to Input 4
The Value dial (R1) selects the effect algorithm to be used. There are four different
algorithms available, and the arrangement of the effects blocks varies depending
upon the algorithm chosen.
There are four input channels into the effects algorithms. In Single mode, the left of
the block diagram shows the Source Assignment Grid, with controls routing of each
source to the input channels. In Multi ot Compose mode, the assignment of each
single section to the four input channels is controlled by the Effect Path function in
the Section menu.

ALGORITHM 1

A 0 0 1 R u n n e r
1 2 3 4 5 6
> 1 - - - - - 1 E 1
> - 2 - - - - 2
> - - 3 - - - 3
> - - - 4 - - 4
A l g
Input 1 passes through all four effects blocks, on its way to the reverb, EQ and main
outputs. It merges with input 3 after the second effects block.
Input 2 goes directly to the reverb block, EQ, and main outputs. It has its own wet/
dry mix in the reverb block.
Input 3 passes through two of the four effects blocks, on its way to the reverb, EQ
and main outputs.
Input 4 goes directly to the Individual outputs without any effect, reverb or EQ. This is
useful for sending sounds directly out of the K5000S for external signal processing.
REFERENCE • EFFECTS
E 2
E 1 E 2 E 3
Input 3 to Main Out
with Effects 3&4,
Reverb and EQ
E 2
E 3
E 1 E 2 E 3
Input 1 to Main Out
with all 4 Effects, Reverb and EQ
Input 2 to Main Out
with only Reverb and EQ
E f f e c t
A l g o r i t h m 1
E 3 E 4 R e v G E Q
E 4 R e v G E Q
Reverb Block
E f f e c t
A l g o r i t h m 1
E 4 R e v G E Q
E 4 R e v G E Q C t r l
Graphic EQ Block
Main Out
M
Individual Out
I
C t r l
Input 4 to Individual Out
with no effects
M
I
6 5