Kawai K5000S Owner's Manual page 63

Use the F2 through F8 keys to select an EQ band, and the Value dial to change
the amount. The slider will change to visually indicate the setting, the number
underneath shows the exact amount.
F8 CONTROL
Goes to the Effect Controller page. Two controllers can be used to control effect
or reverb depth. An expression pedal could be used to add reverb or aftertouch
pressure could be used to add chorusing.
L 1
L 2
L 3
L 4
L1 SOURCE1
Selects the source for the modulation. The source can be any of those listed
below.
L2 DESTINATION 1
Selects the destination for the modulation. This can be the level of the reverb,
or a modulatable parameter in one of the four effects blocks (Effect1 – Effect4).
L3 DEPTH1
Sets the amount of the modulation. This can be positive or negative.
R1 SOURCE2
Selects the source for the modulation. The source can be any of those listed
below.
R2 DESTINATION2
Selects the destination for the modulation. This can be the level of the reverb,
or a modulatable parameter in one of the four effects blocks (Effect1 – Effect4).
R3 DEPTH2
Sets the amount of the modulation. This can be positive or negative.
MODULATION SOURCES
The sources that can be used to control the effects are:
BENDER
The Pitch Bend wheel.
CH PRESS (CHANNEL PRESSURE)
Aftertouch pressure (per channel).
WHEEL
The Modulation Wheel
EXPRESS (EXPRESSION PEDAL)
The Expression Pedal
MIDI VOLUME
The MIDI Volume commend, MIDI Controller 7
PANPOT
The MIDI Pan commend, MIDI Controller 10
REFERENCE • EFFECTS
M 0 1 N e w W o r l d
> S o u r c e 1 B e nd er
> D e s t 1 E 1 Dr y /W et
> D e p t h 1
A l g E 1 E 2
F1 F 2 F3
E f fe c t C on tr o ll e r
S o ur c e2 C h P re s s <
D e st 2 R V D ry / We t 1 <
+ 31 D e pt h 2
E 3 E 4 Re v
F4 F 5 F 6
+ 1 2 <
GE Q C t rl
F 7 F 8
R1
R2
R3
R4
6 3