Kawai K5000S Owner's Manual page 64

G CONT 1 ~ 8 (GENERAL CONTROLLERS 1~ 8)
The eight MIDI General Purpose Controllers – Continuous Controllers 16–19 &
80–83.
SOURCE ASSIGNMENT GRID (SINGLE PATCH ONLY)
In Single mode, the Source Assignment Grid on the left side of the screen is used to
connect the (up to) six sources in each patch to the four inputs of the effect algo-
rithm.
Press any of the left hand buttons to access the Source Assignment Grid.
L1
L2
L3
L4
VALUE DIAL
Selects which source to assign. Sources 1 through 6 are displayed, but only the
sources actually used in the Single patch can be assigned.
L1 INPUT 1 ASSIGN
L2 INPUT 2 ASSIGN
L3 INPUT 3 ASSIGN
L4 INPUT 4 ASSIGN
After selecting a source with the value dial, press the L1, L2, L3, or L4 buttons
to assign that source to input 1, 2, 3, or 4, respectively. The number 1, 2, 3, or
4 is displayed in the column indicating its assignment.
6 4
Source Number (Use Value dial to change)
A 0 01 R u nn er
1 23 45 6
> - -- -- - 1 E1
> - 2- -- - 2
> 3 -3 -- - 3
> - -- 4- - 4
Al g E 1 E2
Input Assignment (Use L1 – L4 to change)
Shows source 1 assigned to input 3
KAWAI K5000S ADVANCED ADDITIVE SYNTHESIZER
Algorithm
E2
E3 E4
E3 E4 Rev
Effe
Rev GEQ
GEQ C