Harmonic Envelope (Dhe) - Kawai K5000S Owner's Manual

HARMONIC ENVELOPE (DHE)

This screen is the menu for Harmonic Envelope functions.
L1
L2
L3
L4
L1 HARMONICS ENVELOPE MULTIVIEW
Displays individual parameters for all 64 harmonic envelopes simultaneously.
L2 HARMONICS ENVELOPE VIEW
Displays all parameters of a single harmonic envelope.
L3 HARMONICS ENVELOPE COPY
Copies harmonic envelopes from a Single patch in memory to the current
patch being edited.
HARMONIC ENVELOPE MULTIVIEW
The Harmonic Envelope Multiview screen shows individual segments of the harmonic
envelope for all harmonics side by side. The display shows the rate on the left and the
level on the right. The harmonics selected for editing are shown by the dots and the
arrow underneath the graphs. Compare this screen to the Harmonic Envelope View
screen (described on page !!!), which shows all segments of a single envelope.
The harmonic envelope starts at zero. However the Attack phase can go above or
below zero and the release does not have to end at zero, like a DCA envelope does.
L1
L2
L3
L4
L1 EDIT GROUP
Since editing harmonics one at a time can become quite cumbersome, the Edit
Group function allows you to select harmonics to modify as a group.
HARMONIC GROUPS
Harmonics can be grouped in the following categories. The dots underneath
the harmonic bars show which harmonics are selected.
BRIGHT
The upper 32 harmonics.
REFERENCE SECTION • SINGLE SECTION
A023 Launcher
> Harmonic Envelope Multiview
> Harmonic Envelope View
> Harmonic Envelope Copy
S1 A S2 P S3 A S4 A S5-- S6--
F1 F2 F3
A023 Launcher
Edit Group Rate= 72
> Bright
> Loop Off
> >
> <
Harm= 1
S1 A S2 P S3 A S4 A S5-- S6--
F1 F2 F3
DHE Menu
F4 F5 F6
DHE Multiview
LVL= 63
F4 F5 F6
R1
R2
R3
R4
F7 F8
R1
R2
Atk <
DC1 <
DC2 <
R3
RLS <
R4
F7 F8
4 1