Midi - Kawai K5000S Owner's Manual

MIDI

L1
L2
L3
L4
L1 LOCAL
Sets MIDI Local Control. If ON the keyboard and sequencer are attached to the
sound generator. If off, the keyboard/sequencer and sound module are separated.
Turning off local control is useful when an external MIDI sequencer is used.
L2 UNIT CHANNEL (SYSTEM CHANNEL)
This sets the basic MIDI channel for the unit. This is the channel that will be
transmitted by the keyboard, and the channel on which Normal program
changes will be received.
L3 PROGRAM RECEIVE
Sets the mode for receiving program changes.
NORMAL
A received program change message causes the instrument to change patches.
SECTION
Within a Multi patch, a received program change message changes only the
Single patch assigned to that channel.
F8 MORE
Goes to the next page of parameters.
L1
L2
L3
L4
L1 TRANSMIT PROGRAM
If on, the K5000S will transmit program changes.
L2 TRANSMIT PRESSURE
If on, the K5000S will transmit aftertouch pressure.
R1 RECEIVE PROGRAM
If on, the K5000S will receive program changes.
R2 RECEIVE PRESSURE
If on, the K5000S will receive aftertouch pressure.
REFERENCE • COMMON SECTION
System
> Local
> Unit Ch
> Pro Receive
SW Arp Rset Bkup MIDI Sys
F1 F1 F1
F2 F3
System
Transmit
> Program
> Pressure
Back Arp Rset Bkup MIDI Sys
F1 F1 F1
F2 F3
ON
1
SEC
Dump More
F1 F1 F1
F4 F5 F6
Receive
ON Program
ON Pressure
Exclusive
Dump
F1 F1 F1
F4 F5 F6
R1
MIDI
R2
R3
R4
F1 F1
F7 F8
R1
MIDI
R2
ON <
ON <
ON <
R3
R4
F1 F1
F7 F8
113