Arpeggiator Edit - Kawai K5000S Owner's Manual

LAST
The last note repeats to fill the extra positions.
FIRST
The first note repeats to fill the extra positions.
ALTERNATE
The played notes are repeated in reverse order to fill the extra positions. If the
repeated notes go back all the way to the beginning, more notes will be
repeated again, this time from the beginning.
F2 VELOCITY
This turns on velocity sensitivity for the arpeggiator. If On each note will play
according to key velocity. If Off all notes will play at the same velocity.
F3 CLOCK
This sets the arpeggiator clock source. If set to EXT, the arpeggiator will ad-
vance in time with an external sequencer or computer.

ARPEGGIATOR EDIT

In the next two pages you can program your own arpeggio patterns. You can adjust
timing, level, and gate time, to create a rhythmic sequence pattern – you select
notes by playing the keyboard.
L1
L2
L3
L4
L1 MODE
There are three playback modes:
PATTERN
Notes play one at a time, with velocity controlled by the keyboard and note
length (timing) controlled by the arpeggiator. You can program up to four
part harmony on each step.
TRIGGER
All notes play together according to the programmed pattern. You can pro-
gram velocity and timing.
GATER
You can program the volume level and length for each step, creating a rhyth-
mic character to the chord.
L2 TOTAL STEP
This is the number of steps in the pattern. If fewer notes are played, the
pattern will either insert rests or repeat notes according to the setting on page
!!!.
L3 KEY ORDER
KEY ON
Notes are arpeggiated in the order in which they are played on the keyboard.
REFERENCE • COMMON SECTION
Arpeggiator
> Mode Pattern
> Total Step
> Key Order Low->Hi
> Note
F1 F1 F1
F2 F3
8
48
Wrte More
F1 F1 F1
F4 F5 F6
R1
Edit
R2
R3
R4
F1 F1
F7 F8
109