Controllers - Kawai K5000S Owner's Manual

CONTROLLERS

The next two screens contain settings for aftertouch pressure, modulation wheel,
and expression pedal control of the sound. Following these is a screen for Assign-
able Controllers.
L1
L2
L3
L4
PRESSURE MODULATION
Channel Pressure, or aftertouch, can be routed to two destinations simultaneously
(actually a third destination is possible by using the Assignable Controllers, page !!!).
L1 DESTINATION 1
Selects the destination for the modulation. The destination can be any of those
listed below.
L2 DEPTH 1
Sets the amount of the modulation. This can be positive or negative.
L3 DESTINATION 2
Selects the destination for the modulation. The destination can be any of those
listed below.
L4 DEPTH 2
Sets the amount of the modulation. This can be positive or negative.
WHEEL MODULATION
The Modulation Wheel can be routed to two destinations simultaneously (actually
a third destination is possible by using the Assignable Controllers, page !!!!). The
Modulation Wheel is MIDI Controller 1.
R1 DESTINATION 1
Selects the destination for the modulation. The destination can be any of those
listed below.
R2 DEPTH 1
Sets the amount of the modulation. This can be positive or negative.
R3 DESTINATION 2
Selects the destination for the modulation. The destination can be any of those
listed below.
R4 DEPTH 2
Sets the amount of the modulation. This can be positive or negative.
REFERENCE SECTION • SINGLE SECTION
A023 Launcher
Press Modulation
> Dest1 Cutoff
> Depth1
> Dest2 FF Bias
> Depth2
Back S1 P S2-- S3 A S4 A S5-- S6-- More
F1 F2 F3
Controller
Wheel Modulation
Dest1 Vibrato DP <
+15 Depth1
Dest2
+2 Depth2
F4 F5 F6
R1
R2
+31 <
Pitch <
R3
0 <
R4
F7 F8
5 5