Dcf (Filter) Envelope - Kawai K5000S Owner's Manual

DCF (FILTER) ENVELOPE

This screen controls the envelope generator for the filter.
L1
L2
L3
L4
L1 DEPTH
Scales the strength of the entire envelope.
L2 ATAK T (ATTACK TIME)
When a note is played (note on), the envelope will go from zero to maximum
in this amount of time. A short attack time gives a sharp edge to the start of
the sound like a piano. A long attack gives a more legato effect.
L3 DCY1 T (DECAY1 TIME)
After reaching the maximum, the envelope will go to the decay1 level in this
amount of time.
L4 DCY1 L (DECAY1 LEVEL)
After reaching the maximum, the envelope will go to this level.
R1 DCY2 T (DECAY2 TIME)
After reaching the decay1 level, the envelope will go to the decay2 level in this
amount of time.
R2 DCY2 L (DECAY2 LEVEL)
The sustain level. After Attack, Decay1, and Decay2, if a note is still held on it
will sustain at this level.
R3 RELS T (RELEASE TIME)
When a note is released (goes off) the envelope will return to zero in this
amount of time.
F8 MORE
Goes to the next page of parameters, which modulate the envelope.
REFERENCE SECTION • SINGLE SECTION
A006 Reznator
> Depth +63
> Atak T 127
> Dcy1 T 127
> Dcy1 L +63
Back S1 P S2-- S3 A S4 A S5-- S6-- More
F1 F2 F3
ENVELOPE
PARAMETERS
SUSTAIN
T I M E
ATTACK DECAY1 DECAY2
TIME TIME
DCF Envelope
Dcy2 T 127 <
Dcy2 L +63 <
Releas 127 <
F4 F5 F6
RELEASE
R1
R2
R3
R4
F7 F8
3 3