Fan Kit 0; Clear Space 0; Fixed Glass Assembly 0; Remote Controls, Wall Controls And Wall Switches 0 - Heatilator EDV3633 Owner's Manual

C. Fan Kit
• Optional
• Contact your dealer for the correct fan kit.
D. Clear Space
WARNING! DO NOT place combustible objects in front of
the fireplace or block louvers. High temperatures may start
a fire. See Figure 2.2.
Avoid placing candles and other heat-sensitive objects on
mantel or hearth. Heat may damage these objects.
Clear space 3 ft (914 mm)
in front of appliance
Figure 2.2 Clear Space
E. Fixed Glass Assembly
See Section 5.B.
F. Remote Controls, Wall Controls and Wall
Switches
Follow the instructions supplied with the control installed
to operate your fireplace:
For safety:
• Install a switch lock or a wall/remote control with child
protection lockout feature.
• Keep remote controls out of reach of children.
See your dealer if you have questions.
0
G. Before Lighting Fireplace
Before operating this fireplace for the first time, have a
qualified service technician:
• Verify all shipping materials have been removed from
inside and/or underneath the firebox.
• Review proper placement of logs, ember material and/or
other decorative materials.
• Check the wiring.
• Check the air shutter adjustment.
• Ensure that there are no gas leaks.
• Ensure that the glass is sealed and in the proper position
and that the integral barrier is in place.
WARNING! Risk of Fire or Asphyxiation! DO NOT oper-
ate fireplace with fixed glass assembly removed.
Determine if this fireplace has a standing pilot or an
Intellifire ignition system. Ask your dealer or open control
access panel, look at gas valve assembly.
• A standing pilot ignition will have a red or black ignitor
button (refer to Figure 2.).
• An Intellifire ignition system will not have a button.
Figure 2.3 Ignitor Button
Heatilator • Eclipse • 4049-229 Rev I • 08/09
Red or Black
Button