Daikin EDHQ011BB6V3 Operation Manual page 12

Altherma unit and options for air to water heat pump system
Hide thumbs Also See for EDHQ011BB6V3:
Table of Contents

Advertisement

Programming space cooling, quiet mode, or booster heater
(1)
mode
5 sec
5 sec
(1) Only applicable for tank with built-in electrical booster heater (EKHW*).
Operation manual
11
Programming space cooling, quiet mode, or booster heater mode
is carried out as follows:
1
2
3
4
5
6
7
8
5 sec
9
10 Press the < button for 5 seconds to store the programmed
5 sec
INFORMATION
Returning to previous steps in the programming procedure
without saving modified settings is done by pressing the
pr button.
Press the < button.
The actual mode is blinking.
Use the pi and pj buttons to select the mode you want
to program (space cooling
c
, quiet mode
(1)
m
).
The selected mode is blinking.
Press the < button to confirm the selected mode.
The first programmed action is displayed.
Use the pi and pj buttons to consult the programmed
actions.
This is called the readout mode. Empty program actions (e.g. 3
and 4) are not displayed.
Press the < button for 5 seconds to enter the programming
mode.
Use the < button to select the action number you would like to
program or to modify.
Use the pi and pj buttons to set the correct action time.
Use the ba button to select:
■ For space cooling:
x: switch cooling and the controller off.
-
-
9: set the temperature by means of the bi and
bj buttons.
a: to select automatic temperature calculation.
-
■ For quiet mode and booster heater mode
button to enable or disable the x action.
Repeat steps
6
to
8
to program the other actions of the selected
mode.
When all actions have been programmed, make sure that the
display shows the highest action number you would like to save.
actions.
If the < button is pressed when action number 3 is displayed,
actions 1, 2 and 3 are stored but 4 is deleted.
You automatically return to step 4. By pressing the pr button
several times, you return to previous steps in this procedure and
finally return to normal operation.
INFORMATION
Programming the booster heater operation
valid if field setting [4-03]=1, 2, or 3.
Unit and options for air to water heat pump system
(1)
s
, or booster heating
(1)
: use the ba
(1)
time is only
E(D/B)(H/L)Q011~016BB
4PW67905-1A – 2013.02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents