Fog Alert Tone Frequency - Vertex Standard VM-3500E Owner's Manual

10.11 FOG ALERT TONE FREQUENCY

This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are "200 Hz" through "850 Hz" in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the [ CALL ( MENU )] key until
Radio Setup
"
2. Press the [ ENT ] key, then select "
" Radio Setup
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select desired
tone frequency.
5. Press the [ ENT ] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
VM-3500E
" menu appear.
" menu with the CHANNEL selector
Fog Freq. " in the
Page 55