Changing The Time Location - Vertex Standard VM-3500E Owner's Manual

6.7 CHANGING THE TIME LOCATION

You may select the time display between local time and UTC (time GPS sends
to radio). Time is displayed when GPS position (LAT/LON) is displayed by press-
ing the [ F ] key followed by the [ 6 ( NAV )] key.
1. Press and hold down the [CALL(MENU)] key until
"Radio Setup" menu appears.
2. Press the [ ENT ] key, then select "
" Radio Setup
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select "
Local
" ."
5. Press the [ ENT ] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
In the local time mode, the display shows the time by the 12-hour system.
Meanwhile, the display shows the time by the 24-hour system in the UTC mode.
Page 12
" menu with the CHANNEL selector
( "UTC" mode )
Time Disp " in the
UTC " or
( "LOCAL" mode )
VM-3500E