All Ships Call; Transmitting An All Ships Call - Vertex Standard VM-3500E Owner's Manual

9.4 ALL SHIPS CALL

The All Ships Call function allows contact to be established with other vessel
stations without having their ID in the individual calling directory. Also, priority
for the call can be designated as Urgency or Safety.
URGENCY Call: This type of call is used when a vessel may not truly be in
SAFETY Call:

9.4.1 Transmitting an All Ships Call

1. Press the [ CALL/SET ( MENU )] key. The "DSC Opera-
tion" menu will appear.
2. Turn the CHANNEL selector knob to select "All Ships."
3. Press the [ ENT ] key. (To cancel, turn the CHANNEL
selector knob to select "Exit.")
4. Turn the CHANNEL selector knob to select the call
("Urgency" or "Safety").
5. Press the [ ENT ] key to transmit the selected type of
all ships DSC call.
6. After the ALL SHIPS CALL is transmitted, the trans-
ceiver will switch to CH16.
7. Listen to the channel to make sure it is not busy, then
key the microphone and say PAN PAN PAN or
"Securite, Securite, Securite" depending on the pri-
ority of the call. Say your call sign and announce the
channel you wish to switch to for communications.
Page 36
distress, but have a potential problem that may lead to a dis-
tress situation. This call is the same as saying PAN PAN PAN
on channel 16.
Used to transmit boating safety information to other vessels.
This message usually contains information about an overdue
boat, debris in the water, loss of a navigation aid or an impor-
tant meteorological message. This call is the same as saying
Securite, Securite, Securite."
VM-3500E