Priority Channel Set; Scan Type - Vertex Standard VM-3500E Owner's Manual

10.5 PRIORITY CHANNEL SET (Depends on the transceiver version)
Allows selection the priority channel.
1. Press and hold down the [ CALL ( MENU )] key until
" Radio Setup
2. Press the [ ENT ] key, then select "
Radio Setup
"
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select the chan-
nel to be a priority.
5. Press the [ ENT ] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
10.6 SCAN TYPE (Depends on the transceiver version)
This selection selects the scan mode between "Memory Scan" and "Priority
Scan."
1. Press and hold down the [ CALL ( MENU )] key until
" Radio Setup
2. Press the [ ENT ] key, then select "
Radio Setup
"
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select "
ity " or " Memory
5. Press the [ ENT ] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
VM-3500E
" menu appears.
" menu with the CHANNEL selector
" menu appears.
" menu with the CHANNEL selector
."
Priority CH " in the

SCAN Type

" in the
Prior-
Page 51