Cashier Name And Status Programming - TEC MA-600 Series Owner's Manual

4. PROGRAMMING OPERATIONS
4.10

Cashier Name and Status Programming

Cashier Name and Cashier Status for each cashier can be programmed here.
CONDITION Any time outside a sale
Mode Lock: SET
OPERATION
1) Menu Tree
2) Operation Flowchart
Depress [↓] then [Enter].
Depress [↓] twice then [Enter].
Select a cashier to be programmed with
the [↑] or [↓] key, then depress [Enter].
Select a cashier status with the [↑] or
[↓] key, then depress the [→] key to
Main Menu
or
Depress [2].
[Enter]
or
Depress [3].
[Enter]
[Enter]
Input a cashier name
[Enter]
[Enter]
set/reset the status.
[Enter]
[End]
ECR is being outside a sale and in SET mode.
"2 NAMES" for various name programming is selected.
"3 CASHIER NAME" is selected.
The cashier name already programmed is displayed.
The [Enter] key depression allows the ECR to enter the
programming mode for a desired cashier. (Cashiers 1 to 8 are
programmable.)
The ECR enters the cashier name input mode
A maximum of 12 one-byte or 6 two-byte characters are input.
The cashier name is entered and displayed.
The ECR enters the cashier status input mode
The two statuses below are set/reset. (N: Reset, Y: Set)
01 Training
02 All MDR
The programmed data is printed.
This programming is ended.
display returns to Main Menu screen.
4-27

4.10 Cashier Name and Status Programming

A long receipt is issued and the
EO1-11154