TEC MA-600 Series Owner's Manual page 133

4. PROGRAMMING OPERATIONS
3) Example
To program "Tomato" as the name of PLU Code No. 0001
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
Depress the [2] or [Enter] key.
Depress the [↓] key three times.
Depress the [4] or [Enter] key.
Depress the [Enter] key.
(PLU Code No. 0001 is selected.)
The [C] key depression clears the PLU
name already programmed.
Input a desired name.
The [Enter] key depression results in
that the input name is entered and
displayed.
The [End] key depression allows the
ECR to end this programming.
LCD Display
4-35
4.13 PLU Name Programming
Remarks
The cursor is moved on to "2 NAMES".
The cursor is moved on to "4 PLU (ITM NO.)
NAME".
"4 PLU (ITM NO.) NAME" is selected.
When programming a name of another PLU,
move the cursor on to a desired PLU with the
[↓] or [↑] key, then depress the [Enter] key.
The PLU name already programmed is
displayed.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[T] [A/a] [O] [M] [A] [T] [O] [Enter]
When the [Enter] key is depressed, the
programmed data is printed.
A long receipt is issued and the display
returns to Main Menu screen.
EO1-11154