TEC MA-600 Series Owner's Manual page 137

4. PROGRAMMING OPERATIONS
2) Operation Flowchart
Depress [↓] twice then [Enter].
Depress [1] or [Enter] key.
Depress [1] or [Enter] key.
Select a department to be programmed
with the [↑] or [↓] key, then depress
Input a Group No. (01 to15), then
Input a preset price, then depress
Select a department status with the [↑]
or [↓] key, then depress the [→] key to
set/reset the status. After that, depress
Input a VAT/Add-on tax status code
(max. 8 digits), then depress [Enter].
Input a High Amount Limit (max. 7
digits), then depress [Enter].
Input a Low Amount Limit (max. 7
digits), then depress [Enter].
Input a Gross Profit Rate (0.01 to
100.00%), then depress [Enter].
Main Menu
or
Depress [3].
[Enter].
[Enter]
depress [Enter].
[Enter].
[Enter].
[End]
ECR is being outside a sale and in SET mode
"3 DP/PLU" for Department/PLU table programming is selected.
"1 DP" is selected.
"1 DP SETTING" is selected.
A department to be programmed is selected.
The ECR enters detailed setting mode for department.
Department Group No. Setting (See *1.)
Preset Price Setting (See *2.)
Department Status Setting (See *3.)
VAT/Add-on Tax Status Setting (See *4.)
High Amount Limit Setting (See *5.)
Low Amount Limit Setting (See *6.)
Gross Profit Rate Setting (See *7.)
This programming is ended.
display returns to Main Menu screen.
4-39
EO1-11154
4.15 Department Table Programming
A long receipt is issued and the