Digit 7-Segment Numeric Display; Message Description (Status Lamps) - TEC MA-600 Series Owner's Manual

5. DISPLAY
Error Message
(Standard Setting)
CASHING PROHIBIT
NEGATIVE NUMBER
PROGRAM ERROR
VOLTAGE ERROR
It is recommended to prepare a copy of the above table, and place it near the ECR.

5.2 10-digit 7-segment Numeric Display

(1) Numeric Display
AMOUNT (7 digits) Displays the numeric data such as amount and quantity. When the obtained total or
subtotal amount is 10-digit value, the RPT and DPT digits are also used for the amount
display. When no entries are under way and the Mode Lock is in the REG position, the
current time is displayed.
DPT (2 digits) Displays a Department Code of a department item just entered. The department name is
also displayed in the LCD display. It remains lit when the entry of the same department
item is repeated.
RPT (1 digit) Displays the repeat count of the same Department or PLU item. The count is indicated
from the second entry on, and only the lowest digit of the repeat count will be displayed
even when the count exceeds nine (such as "0" for 10, "1" for 11, etc.)

5.3 Message Description (Status Lamps)

Status Lamp Colour
ALM
Green
SLIP
R OFF
Green
SIGN ON
PC Green
TL Green
ST Green
CG
ERROR MESSAGE TABLE (continued)
Cause of the Error
Cheque cashing prohibition error
Negative balance error when the credit balance
is allowed by the program option.
Programming error
Printer voltage error
Illuminates with the alarm buzzer generated to indicate that the last operation or
Red
numeric entry was an error. To clear the error status, depress the [C] key.
Blinks when the program option "slip print compulsory" has been selected. This
lamp does not illuminate even when a slip is set to the slip printer.
Illuminates when the Receipt-OFF mode is declared by the [LOG/RECEIPT] (or
[RECEIPT]) key. In this condition, no receipts will be issued for a sale to be
Red
entered. It extinguishes by depressing the [LOG/RECEIPT] (or [RECEIPT]) key
again for Receipt-ON mode.
Illuminates only when the Cashier Code Entry method is selected. It illuminates
when a cashier has signed ON. It extinguishes when the cashier has signed
OFF, and the message "LOG" is displayed in the LCD display instead.
Illuminates during data communication between the ECR and a PC.
Illuminates on a finalizing operation with the total amount displayed when the sale
is finalized without any amount tendered.
Illuminates when the [ST] key is depressed, indicating that the displayed amount
is subtotal.
When an amount tendering operation is performed, it illuminates with the change
Red
due displayed.
P a t e r s s t r a a t 1 0 6 - 1 0 8
2 3 0 0 T u r n h o u t
T e l : 0 1 4 / 4 2 . 5 5 . 9 9
The depressed key has been programmed with
the status of no-purchase cashing prohibition.
Contact your nearest TOSHIBA TEC
representative if necessary.
Perform the discount operation within an
allowance.
Contact your nearest TOSHIBA TEC
representative.
Description
i n f o @ v a n me c h e l e n . b e
w w w . v a n me c h e l e n . b e
w e b s h o p . v a n me c h e l e n . b e
5- 4
EO1-11154
5.2 10-digit 7-segment Numeric Display
Cancelling the Error