Using the Menu
Advanced Menu / View
This permits fine video settings to be made. (Operate while the image that you would like to adjust or set is being
projected.)
Image
Horizontal Position / Vertical Position
Adjusts the position when the screen picture is shifted vertically or horizontal-
ly. Usually, an automatic adjustment is performed at the time of source input
detection; however, when automatic adjustment is not satisfactory, please
adjust as described below.
•
Align the cursor with the
adjust with the cursor buttons (◀▶).
Vertical Flip / Horizontal Flip
Use this when the projector is installed suspended from the ceiling, or is in a
rear projection setup.
•
Align the cursor with the
setting with the cursor buttons (◀▶).
Vertical
Flip: Off
Flip: Off
Horizontal
E-68
Data Projector
View
Horizontal
Position, or
Vertical
Flip, or
Horizontal Flip
Vertical
Flip: Off
Vertical
Flip: On
Horizontal
Horizontal
Color
Vertical Position
item name and
item name and make the
Flip: On
Vertical
Flip: On
Flip: On
Flip: Off
Horizontal
Input
Admin