Regular Operation; Selection Of Input Signal; Automatic Adjustment - Taxan KG-PS232Xh User Manual

Basic Operation

Regular Operation

This section describes the use of direction operation with the buttons of the projector and the remote control.
See "Using the Menu" for details about operation by using the menu. See Page E-46.

Selection of Input Signal

Select the input source that is to be projected.
• Press SOURCE button.
• A message like the one to the right will be displayed on the projection
screen. Each press of the cursor buttons (▲▼) will move the cursor. Select
the source that you would like to project and press the ENTER button to
finalize.
• When Auto Detect
the source having an input signal will be selected automatically.
Auto Detect
• When
regardless of the presence or absence of an input signal.
• See "Auto Detect" for details about the On/Off setting of the Auto Detect
function. See Page E-51.

Automatic Adjustment

This function performs automatic adjustments of the projected RGB input sig-
nal position shift, the size of the screen image, vertical stripes, and color shift.
Usually, the video is adjusted automatically at the time of input selection.
• Press AUTO button.
• Press the button to start automatic adjustment.
• When the display position is shifted, there are vertical stripes on the screen
or other instances of a poor projection even though automatic adjustment
has been performed, adjust the video manually. See "Image" for details. See
Pages E-63 to 65.
is On and there is no input signal at the selected source,
is Off, there will be switching to the selected source
KG-PS232Xh/232X | KG-PV131X/131S User's Manual
Note
When the video extends beyond the screen or is
smaller than the screen, set the aspect ratio setting
to Auto. See "Select Aspect Ratio" on Page E-66.
E-39