Phase Control; Definition - Taxan KG-PS232Xh User Manual

Using the Menu
Advanced Menu / Image
This permits fine video settings to be made. (Operate while the image that you would like to adjust or set is being
projected.)
Image

Phase Control

This performs an adjustment when there is a screen color shift or flicker. Usu-
ally, an automatic adjustment is performed at the time of source input detec-
tion; however, when automatic adjustment is not satisfactory, please adjust
as described below.
• Align the cursor with the
cursor buttons (◀▶).
• While viewing the screen, adjust so that the color shift or flicker no longer
stands out.

Definition

This adjusts the definition when an input signal is adjusted to the resolution of
this projector and an enlarged or reduced display is produced.
• Align the cursor with the
(◀▶).
Definition
• Setting to
fects will no longer stand out. On the other hand, setting
in a sharp image, and fine lines will appear distinct.
View
Phase Control item name and adjust with the
Definition
item name and adjust with the cursor buttons
Off
will result in a soft image, and moire patterns and other ef-
KG-PS232Xh/232X | KG-PV131X/131S User's Manual
Color
Definition to On will result
Input Admin
Technical Point
What is phase?
Phase indicates the timing of the video signal. When a shift
occurs in the timing of the video signal between the equip-
ment that outputs the video and the projector, a color shift or
flicker will be produced. By adjusting the timing with
Control in the projector, proper video can be projected.
Phase
E-65