Using the Menu
Advanced Menu / Input
This function is used in setting the input signals of the input connectors.
Image
Usually, this should be set to Auto. See Page E-51.
Only when identification is not possible with Auto, should the
be made.
•
Align the cursor with one of the various item names and make the setting
with the cursor buttons (◀▶).
Input Signal
Computer1/2
Video/S-Video
E-74
Data Projector
View
Selection Item
Selection Content
Auto
Automatically detects the signal.
Computer
Fixed to the analog RGB signal.
Component
Fixed to the component signal.
Auto
Automatically detects the signal.
NTSC
Fixed to the NTSC system.
PAL
Fixed to the PAL system.
SECAM
Fixed to the SECAM system.
NTSC 4.43
Fixed to the NTSC 4.43 system.
PAL M
Fixed to the PAL M system.
PAL N
Fixed to the PAL N system.
PAL 60
Fixed to the PAL 60 system.
Color
Input
Input
setting
Admin