Table of Contents
Advertisement
Image
• Perform this operation while projecting the picture for which the adjustment/setting will be made.
• Select the menu name "Image".
See "Menu Operation Method" on Page E-34 for information about performing menu operations. The item name display will
differ depending on the input signal. See "List of Item Names Offering Input Selection and Adjustments/Settings" on Page E-39.
Brightness / Contrast / Color / Tint / Sharpness
Picture qualities such as brightness and contrast will change depend-
ing on the whether the room is bright or dark. Please adjust to suit your
preference.
Select the desired item name and then adjust with the SELECT (
Item Name
Brightness
Darker
Contrast
Less contrast
Color
Less dense color
Tint
More red
Sharpness
Softer image
Note:
* The adjustment values of the adjustable items are stored according to input source.
* "Tint" can only be adjusted when inputting NTSC composite/S-Video signals or
component signals.
Picture Adj. / Fine Picture / H Position / V Position
Usually, automatic adjustment is performed at the time of signal selec-
tion, but when automatic adjustment is not effective, these adjustments
can be performed.
Note:
When the image extends beyond the boundaries of the screen or is smaller than the
screen, check that the "View" → "Aspect Ratio" setting is set to "Auto". See "As-
pect Ratio" on Page E-46.
Picture Adj. (Picture Adjustment)
Adjust this when bright and dark vertical bands appear on the screen.
Select the "Picture Adj." item name and adjust with the SELECT (
so that the vertical bands disappear and brightness becomes uniform across
the screen.
SELECT
Button
Brighter
More contrast
Denser color
More green
Sharper image
) buttons.
SELECT
Button
) buttons
E-41
Hide quick links:
Advertisement
Chapters
Table of Contents
