Antenna Terminals; External Controller; Network Audio - Denon S-302 Owner's Manual

ENGLISH

Antenna Terminals

An F-type FM antenna cable plug can be connected directly.
AM/FM
Direction of broadcasting station
FM antenna
AM loop antenna
(Supplied)
75 Ω/ ohms
Coaxial cable
FM indoor antenna
Black
(Supplied)
Ground
AM loop antenna assembly
Remove the vinyl tie and take out the connection
line.
Connect to the AM antenna terminals.
Bend in the reverse direction.
a. With the antenna on top any stable
surface.
Mount
b. With the antenna attached to a wall.
Installation hole Mount on wall, etc.

1. Push the
lever.
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
• Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.

External Controller

Recorder etc.
White
AM outdoor antenna
RS-232C connector
This connector is used for an external controller.
b If you wish to control the S-302 from an external
controller using the RS-232C connector,
perform the operation below beforehand.
q Turn the S-302's power.
w Turn off the S-302's power from the external
controller.
e Check that the S-302 is in the standby mode.
Connection of AM antennas
2. Insert the 3. Return the
conductor. lever.
Video
Extension jack for future use.
Input Output
Infrared
retransmitter
Infrared
sensor

Network Audio

[Wired LAN]
Modem
Internet radio
To WAN side
To LAN port
To LAN port
Router
[Wireless LAN]
Modem
Internet radio
To WAN side
Router with access point
Computer
LAN port/
Ethernet port
Computer
Wireless LAN rod
antenna (Supplied)
Turn right