Network Setup - Denon S-302 Owner's Manual

ENGLISH
f Network Setup
Make settings for wired or wireless LAN.
Wired LAN
Make settings for wired LAN.
To acquire the IP address automatically
using the DHCP function
To not pass through the proxy server
Recheck the connections and settings if you cannot connect to the Internet (vpage 14).
NOTE Knowledge about networks is required to make the IP address and proxy settings. For details, consult a network administrator.
0
Turn on the S-302's power.
If a Ethernet cable is connected
The mode automatically switches to "Wired" .
To enter the IP address manually
At the GUI menu "Setup" – "Network Setup" –
"Network Setup" – "Detail" setting, set "DHCP" to
"OFF" and enter the IP address, subnet mask, default
gateway, primary DNS and secondary DNS.
To connect via proxy server
At the GUI menu "Setup" – "Network Setup" –
"Network Setup" – "Proxy" setting, set "Proxy" to
"ON" and enter the address or domain name and
port numbers.
This completes the setting.
This setting is required when the network
is established via proxy servers.