Pty Search; Tp Search; Rt (Radio Text) - Denon S-302 Owner's Manual

ENGLISH
<FUNCTION>
ON/STANDBY
ON/STANDBY
[DVD/CD],
[FM/AM], [AUX],
[iPod], [NET/USB]
1
[DISPLAY]
[TUNING +/–]
[uio p]
[ENTER]
[RETURN]
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


PTY Search

Use this function to find RDS stations broadcasting a
designated program type (PTY).
1
For a description of each program type, refer to "Program
Type (PTY)" .
1
Setthebandto"FM",thenpress
"PTYSEARCH"appearsonthedisplay.
2
Watching the display, press
outthedesiredprogramtype(vpage33).
3
[TUNING +
Press
The PTY search operation starts automatically.
[SUBTITLE/PTY]
The station name is displayed on the display after searching
[ZOOM/RT]
stops.
[AUDIO/RDS]
b If no station broadcasting the designated program type is found
when all the frequencies are searched, "NO PROGRAM" is
displayed.
[ENTER]
When the [o p] is pressed during the PTY search operation, all
frequencies are searched once.
[RETURN]
[uio
p]

TP Search

Use this function to find RDS stations broadcasting traffic
programs (TP stations).
1
Setthebandto"FM",thenpress
"TPSEARCH"appearsonthedisplay.
2
[TUNING +
Press
The TP search operation starts automatically.
The station name is displayed on the display after searching
stops.
b If no TP station is found when all the frequencies are searched,
"NO PROGRAM" is displayed.
When the [o p] is pressed during the TP search operation, all
frequencies are searched once.
[AUDIO/RDS]
until
[SUBTITLE/PTY]
 to call
–]
/ .
[AUDIO/RDS]
until
–]
/ .

RT (Radio Text)

"RT" appears on the display when radio text data is
received.
Set the input source to "TUNER", then press
RT]
.
When the station currently tuned in is offering a radio text message
service, the message scrolls on the display.
b When the RT mode is turned on while an RDS radio station not
offering an RT service is tuned in, "NO TEXT DATA" is displayed
on the display, then the mode automatically switches to the PS
mode.
b In the same way, the mode automatically switches to the PS
mode when the RT service is finished. In this case, the mode
automatically switches from the PS mode back to the RT mode
when an RT broadcast is resumed.
b To turn the RT mode off, press [ZOOM/RT] and switch to the desired
display mode.
The RT mode cannot be set in the AM band or for FM stations not
offering RDS broadcasts.
[ZOOM/