Denon S-302 Owner's Manual page 55

Symptom Cause
Internet radio • Ethernet cable is not properly
cannot be played. connected or network
disconnected.
• Program is being broadcast in
non-compatible format.
• The computer's or
firewall is activated.
• Radio station is not currently
broadcasting.
• IP address is wrong.
Server is not • The computer's or
found, or it is firewall is activated.
not possible to • Computer's power is not turned
connect to the on.
server. • Server is not running.
• Set's IP address is wrong.
Cannot connect to • Radio station is not currently
preset or favorite broadcasting.
radio stations. • Radio station is not currently in
service.
For some • Station is congested or not
radio stations, currently broadcasting.
"Server Full"
or "Connection
Down" is
displayed and
station cannot be
connected to.
Sound is broken • Network's signal transfer speed
during playback. is slow or communications lines
or radio station is congested.
Sound quality is • File being played has a low bit
poor or played rate.
sound is noisy.
Countermeasure
• Check the connection status.
is
• Only Internet radio programs in
MP3 and WMA can be played on
this set.
router's • Check the computer's or router's
firewall settings.
• Choose a radio station that is
currently broadcasting.
• Check the set's IP address.
router's • Check the computer's or router's
firewall settings.
• Turn on the power.
• Launch the server.
• Check the set's IP address.
• Wait a while before trying again.
• It is not possible to connect to
radio stations that are no longer
in service.
• Wait a while before trying again.
• This is not a malfunction. When
playing broadcast data with a
high bit rate, the sound may
be broken, depending on the
communications conditions.
• This is not a malfunction.
GWireless LANH
Page
14 Symptom
Cannot connect • The settings
to network. and network key (WEP) are
–
incorrect.
• The reception is poor and the
signals cannot be received.
–
37
20, 21
–
• There are multiple networks and
– the usable channels overlap.
–
20, 21
– Played sound is • There are multiple networks and
interrupted or the usable channels overlap.
– sound cannot be
played.
–
–
–
Cause Countermeasure
of the SSID • Match the network settings with
the S-302's settings.
• Shorten the distance from the
wireless LAN's access point,
remove any obstacles
otherwise improve visibility, then
try reconnecting. Also install
away from microwave ovens
and the access points of other
networks.
• Set the access point's channel
settings away from the channels
used for other
Alternatively, connect using a
network cable.
• Set the access point's channel
settings away from the channels
used for other
Alternatively, connect using a
network cable.
ENGLISH
Page
21
–
and
–
networks.
–
networks.