Registering Copy Programs (Mode Memory) - Oce cm3522 User Manual

Additional copy operations
3.4

Registering copy programs (Mode Memory)

Frequently used copy settings can be stored together as a program to easily be recalled. A maximum of 30
programs can be registered.
A name of up to 16 characters can be specified for the registered copy programs.
1
Using the touch panel and control panel keys, specify the copy settings to be registered in the copy
program.
? Can the current settings be checked?
% To check the currently specified copy settings, touch [Check Job] in the left panel, and then touch
[Job Details]. For details, refer to
2
Press the [Mode Memory] key.
The Recall Copy Program screen appears.
3
From the copy program buttons that appear in the screen, touch the button where you wish to store
the copy settings, and then touch [Register Program].
– There are three Recall Copy Program screens. Touch [↑] and [↓] to display a different screen.
– If 30 copy programs have been registered, delete an unnecessary copy program. For details on
deleting copy programs, refer to
The Register Copy Program screen appears.
4
Use the control panel keypad and the keyboard that appears in the touch panel to type in the name of
the copy program.
– The program name can contain a maximum of 16 characters.
Océ cm3522/cm2522
"Checking the Copy Settings (Check Job)" on page
"Deleting a copy program" on page
3
3-2.
3-11.
3-9