Control Panel - Oce cm3522 User Manual

Copy operations
Hide thumbs Also See for cm3522:
Table of Contents

Advertisement

Before making copies
1.1.8

Control panel

No.
Part name
1
Touch panel
2
Main Power indicator
3
[Power] (auxiliary power) key
4
[Mode Memory] key
5
[Utility/Counter] key
6
[Reset] key
7
[Interrupt] key
8
[Stop] key
9
[Proof Copy] key
10
[Start] key
11
Data indicator
12
[C] (clear) key
13
Keypad
Océ cm3522/cm2522
22
21
20
19
18
17
16
15
14
Description
Displays various screens and messages.
Specify the various settings by directly touching the panel.
Lights up in green when the machine is turned on with the main power switch.
Press to turn on/off machine operations. When turned off, the machine enters
a state where it conserves energy.
Press to register (store) the desired copy/fax/scan settings as a program or to
recall a registered program. (See
Press to display the Meter Count screen and the Utility screen.
Press to clear all settings (except programmed settings) entered in the control
panel and touch panel.
Press to enter Interrupt mode. While the machine is in Interrupt mode, the in-
dicator on the [Interrupt] key lights up in green and the message "Now in Inter-
rupt mode." appears on the touch panel. To cancel Interrupt mode, press the
[Interrupt] key again.
Pressing the [Stop] key while copying, scanning or printing temporarily stops
the operation.
Press to print a single proof copy to be checked before printing a large number
of copies. (See
Press to start the copy, scan or fax operation. When this machine is ready to
begin the operation, the indicator on the [Start] key lights up in blue. If the in-
dicator on the [Start] key lights up in orange, copying cannot begin.
Press to restart a stopped job. For details on jobs, refer to
List screen" on page
Flashes in blue while a print job is being received.
Lights up in blue when a print job is queued to be printed or while it is being
printed.
The indicator lights up in blue when there is saved fax data or unprinted fax
data.
Press to clear a value (such as the number of copies, a zoom ratio, or a size)
entered using the keypad.
Use to type in the number of copies to be produced.
Use to type in the zoom ratio.
Use to type in the various settings.
1
13
12
11
10
9
p.
3-9.)
p.
3-6.)
10-2.
1
2
3
4
5
6
7
8
"Overview of Job
1-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cm2522

Table of Contents